|
 |
|
 |
|
Excellent Lightweight Splash Protection!
Tychem QC polyethylene-coated garments from Lakeland provide excellent lightweight splash protection from many acids and other liquid chemicals. It is a good economical choice for use in many industrial plants and chemical cleanup operations. Seams are available with either serged, bound or heat sealed seams for increased holdout of liquids and dry particulates. Garments are available in high visibility yellow.
Reliable and Economical
This full line of polyethylene coated Tychem QC garments is a top choice for reliable and economical splash protection. Chemical cleanup and industrial site workers are provided with Level B protection against acids, bases and other liquid chemicals. The high visibility yellow garments are offered in bound and serge seams making them suitable for light duty splash protection.
| Tychem QC Permeation Data for ASTM Recommended List of Chemicals for Evaluating Protective Clothing Materials (ASTM F1001) |
| Chemical Name |
Physical Phase |
Normalized Breakthrough Time (minutes) |
Permeation Rate (pg/cm2/min) |
| Acetone |
L |
Immediate |
10 |
| Acetonitrile |
L |
Immediate |
16 |
| Ammonia (anhydrous) |
G |
Immediate |
3.1 |
| 1,3-Butadiene |
G |
8 |
12 |
| Carbon Disulfide |
L |
Immediate |
High |
| Chlorine Gas |
G |
Immediate |
>50 |
| Dichloromethane |
L |
Immediate |
>50 |
| Diethylamine |
L |
Immediate |
64 |
| N,N-Dimethylformamide |
L |
7 |
0.72 |
| Ethyl Acetate |
L |
Immediate |
12.7 |
| Ethylene Oxide |
G |
Immediate |
168 |
| n-Hexane |
L |
Immediate |
High |
| Hydrogen Chloride |
G |
Immediate |
9.3 |
| Methanol |
L |
Immediate |
2.2 |
| Methyl Chloride |
G |
Immediate |
0.3 |
| Nitrobenzene |
L |
Immediate |
18 |
| Sodium Hydroxide, 50% |
L |
>480 |
ND |
| Sulfuric Acid (conc.) |
L |
>480 |
ND |
| Tetrachloroethylene |
L |
Immediate |
410 |
| Tetrahydrofuran |
L |
Immediate |
183 |
| Toluene |
L |
Immediate |
High |
|
Index of Codes: ND = none detected, > = greater than, < = less than,
L = Liquid, G = Gas |
| Numbers reported are averages of samples tested by the ASTM F739 test method. Sample results do vary and therefore averages for these results are reported |
|
|
 |
|
 |
|
|
